8 classes · New York City
Hands-on classes
Real equipment, an instructor beside you, and the material online in the app for the months either side of it.
Every class meets at 136-06 Horace Harding Expressway, Flushing, NY 11367. The hands-on class brochure is a PDF, 2.8 MB.
Hands-on
Charging, recovery, evacuation, brazing and EPA 608
$3,000
6 months access
Weigh in a charge, recover one without venting it, pull a vacuum that holds, and braze the joint that carries it.
Three days: November 14, November 21 and November 28, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Heat pumps, mini-splits and geothermal
$3,000
6 months access
Heat pumps, mini-splits and ground loops: the cycle, the controls, the schematic and the service call.
Three days: December 5, December 12 and December 19, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Electrical, electric heat and air conditioning
$3,000
6 months access
Three Saturdays on the electrical side of HVAC, electric heat, air conditioning, and finding the fault in any of them.
Three days: January 9, January 16 and January 23, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Gas and oil heat
$3,000
6 months access
Three Saturdays on gas and oil heat: combustion, furnace install, service and heating safety.
Three days: January 30, February 6 and February 13, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Light commercial AC and refrigeration
$3,000
6 months access
Three Saturdays on commercial AC and refrigeration, pressure enthalpy and psychrometrics.
Three days: February 20, February 27 and March 6, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Hydronic heat and water heaters
$3,000
6 months access
Three Saturdays on hydronic heat and the water heaters beside it.
Three days: March 13, March 20 and March 27, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Carbon monoxide and combustion
$3,000
6 months access
Three Saturdays on combustion analysis, carbon monoxide safety and the building pressures behind both.
Three days: April 3, April 10 and April 17, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Hands-on
Building automation systems
$3,000
6 months access
Three Saturdays on direct digital control: networks, controllers, logic, and the sensors and actuators in the field.
Three days: April 24, May 1 and May 8, 9:30 AM to 12:30 PM and 1:30 PM to 4:30 PM.
Training a crew
Group pricing, invoicing and purchase orders, and an activity report for every seat.